Manufacturing process commands

The command buttons and the Edit and right-click menus in the Manufacturing Process pane provide commands for viewing and/or editing the details available for each step in the manufacturing process. Commands that are not allowed for a step are disabled.

The following commands are available in the Manufacturing Process pane:

For an aPriori component
To change the primary process group	Click the Primary Process Group command button.
To edit material details	Click the Material command button or select Edit > Material Selection.
To display the details of the currently selected material	Click the command button next to the Material button.
To edit production information	Select Edit > Production Info.
To edit the tolerance policy for a component	Select Edit > Tolerance Policy.
To select and edit a routing	Edit > Routing Selection or right-click > Routing Selection.

For a process step in the routing tree
To edit yields	Edit > Edit Yields or right-click >Yields.
To select a Digital Factory	Edit > Digital Factory Selection or right‑click > Digital Factory Selection.
To display Digital Factory details	Edit > Show Digital Factory details or right‑click > Show Digital Factory details.
To manually select a machine for a process	Edit > Machine Selection or right-click > Machine Selection.
To edit the process setup options	Edit > Process Setup Options or right-click > Process Setup Options.
To select and edit a routing	Edit > Routing Selection or right-click > Routing Selection.
To highlight associated GCDs	right‑click > Highlight Associated GCDs