Purchased Tool Components Cost Calculation

Purchased Tool Components Cost = Guide Pin Cost + Guide Bush Cost + Side Lock Cost + Limit Switch Cost + Air Poppet Cost + Hydraulic Cylinder Cost + Return Pins And Bushing Cost + Ejector Guide Pins Bushings Cost + Ejector Pins Cost

  • Material Cost – Guide Pin Cost: This is calculated as: (Guide Pin Unit Cost * Guide Pin Quantity):

    • Guide Pin Unit Cost: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Unit Cost corresponding to Guide Pin.

    • Guide Pin Quantity: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Quantity corresponding to Guide Pin.

  • Material Cost – Guide Bush Cost: This is calculated as: (Guide Bush Unit Cost * Guide Bush Quantity):

    • Guide Bush Unit Cost: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Unit Cost corresponding to Guide Bush.

    • Guide Bush Quantity: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Quantity corresponding to Guide Bush.

  • Material Cost – Side Lock Cost: This is calculated as: (Side Lock Unit Cost * Side Lock Quantity):

    • Side Lock Unit Cost: aPriori performs a lookup in the cmStandardToolingComponentstable and returns the Unit Cost corresponding to Side Lock.

    • Side Lock Quantity: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Quantity corresponding to Side Lock.

  • Material Cost – Limit Switch Cost: This is calculated as: (Limit Switch Unit Cost * Limit Switch Quantity):

    • Limit Switch Unit Cost: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Unit Cost corresponding to Limit Switch.

    • Limit Switch Quantity: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Quantity corresponding to Limit Switch.

  • Material Cost – Air Poppet Cost: This is calculated as: (Air Poppet Unit Cost * Air Poppet Quantity):

    • Air Poppet Unit Cost: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Unit Cost corresponding to Air Poppet.

    • Air Poppet Quantity: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Quantity corresponding to Air Poppet.

  • Material Cost – Hydraulic Cylinder Cost: This is calculated as: (Hydraulic Cylinder Unit Cost * Hydraulic Cylinder Quantity):

    • Hydraulic Cylinder Unit Cost: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Unit Cost corresponding to Hydraulic Cylinder.

    • Hydraulic Cylinder Quantity: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Quantity corresponding to Hydraulic Cylinder.

  • Material Cost – Return Pins And Bushing Cost: This is calculated as: (Return Pin And Shoulder Bushing Unit Cost * Return Pin And Shoulder Bushing Quantity):

    • Return Pin And Shoulder Bushing Unit Cost: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Unit Cost corresponding to Return Pin And Shoulder Bushing.

    • Return Pin And Shoulder Bushing Quantity: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Quantity corresponding to Return Pin And Shoulder Bushing.

  • Material Cost – Ejector Guide Pins Bushings Cost: This is calculated as: (Ejector Guide Pins Bushing Unit Cost * Ejector Guide Pins Bushing Quantity):

    • Ejector Guide Pins Bushing Unit Cost: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Unit Cost corresponding to Ejector Guide Pin Bushing.

    • Ejector Guide Pins Bushing Quantity: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Quantity corresponding to Ejector Guide Pin Bushing.

  • Material Cost – Ejector Pins Cost: This is calculated as: (Ejector Pins Unit Cost * Ejector Pins Quantity):

    • Ejector Pins Unit Cost: This is calculated as: (Projected Area / Default Ejector Pin Spacing):

      • Projected Area: This is the Parting Line Projected Area property, visible in the Geometric Cost Drivers panel.

      • Default Ejector Pin Spacing: This is specified by the cmEjectorPinSpacing cost model variable (7903.21 mm2 in starting point Digital Factories).

    • Ejector Pins Quantity: aPriori performs a lookup in the cmStandardToolingComponents table and returns the Quantity corresponding to Ejector Pin.