Plasma Cut Options

The Plasma Cut process supports the process-level setup options described in the following sections:

• Part Nesting Options

• Minimum Hole Diameter for Laser, Fiber Laser, and Plasma Cutting

• Kerf Width for Laser, Fiber Laser, and Plasma Cutting

• Enable Plasma Bevel Cutting

Enable Plasma Bevel Cutting

By default in starting point Digital Factories, chamfers are assumed to be created by secondary machining, so plasma bevel cutting is disabled. Digital Factory Administrators can customize the default with the cost model variable defaultPlasmaBevelCuttingStatus (true for enabled or false for disabled). Users can override the default on a part-by-part basis with this setup option.