Process Defaults and Thresholds

This section lists some of the important cost model variables.

CycleTimeAdjustmentFactor	See process cycle time formulas, for example, Manual MIG Welding Process Cycle Time
handlingMultiplier	See Pick and Place Options.
insertionMultiplier	See Pick and Place Options.
manualScrewTighteningObstructedAndVision	See Mechanical Assembly Options.
manualScrewTighteningObstructedOrVision	See Mechanical Assembly Options.
manualScrewTighteningTime	See Screw Tighten - Manual Operation Cycle Time.
nutInsertTime	See Nut Insert Operation Cycle Time.
nutInsertTimeObstructedAndVision	See Mechanical Assembly Options.
nutInsertTimeObstructedOrVision	See Mechanical Assembly Options.
powerScrewTighteningObstructedAndVision	See Mechanical Assembly Options.
powerScrewTighteningObstructedOrVision	See Mechanical Assembly Options.
powerScrewTighteningTime	See Screw Tighten - Power Operation Cycle Time.
pressFitTime	See Press Fit Operation Cycle Time.
pressFitTimeObstructedAndVision	See Mechanical Assembly Options.
pressFitTimeObstructedOrVision	See Mechanical Assembly Options.
reorientTime	See Reorient Operation Cycle Time Calculation.
rivetTime	See Rivet Operation Cycle Time.
rivetTimeObstructedAndVision	See Mechanical Assembly Options.
rivetTimeObstructedOrVision	See Mechanical Assembly Options.
snapFitTime	See Snap Fit Operation Cycle Time.
snapFitTimeObstructedAndVision	See Mechanical Assembly Options.
snapFitTimeObstructedOrVision	See Mechanical Assembly Options.
tabBendTime	See Tab Bend Operation Cycle Time.
tabBendTimeObstructedAndVision	See Mechanical Assembly Options.
tabBendTimeObstructedOrVision	See Mechanical Assembly Options.