Modifying the Process-level Routings

This section shows you how to add process-level routings that are analogous to those of Laser Cut. Modify the AbrasiveJet Cut Component template as follows:

  1. Find the line that starts with the following:

    'Sheet Metal' ::=

  1. In that line, select the following portion:

    '[CTL]/Laser/[Bend]' |

  1. Type control-c to copy the selected text.

  2. In that same line, click immediately before the following:

    '[CTL]/Turret/[Bend]'

  1. Type control-v to paste the copied text. This adds a new alternative routing to the top-level template node.

  2. Replace Laser with AbrasiveJet in the newly pasted text portion.

  3. Copy the line that starts with the following (copy the entire line):

    #'[CTL]/Laser/[Bend]' ::=

  1. Paste it as a new line. This line will define the alternative routing that you added in step 5.

  2. In the new line, change Laser to AbrasiveJet throughout.

  3. Find the line that starts with the following:

    ‘Cutting’ ::=

  1. Click at the end of that line and enter a vertical bar, |, followed by the AbrasiveJet process node name:

    | 'AbrasiveJet Cut':'Sheet Metal'

    You can copy the node name ('AbrasiveJet Cut':'Sheet Metal') from the Template Node Name field of the Node Attributes tab for the AbrasiveJet Cut process.